Date: Mon, 18 Jul 94 04:30:06 PDT From: Advanced Amateur Radio Networking Group Errors-To: TCP-Group-Errors@UCSD.Edu Reply-To: TCP-Group@UCSD.Edu Precedence: Bulk Subject: TCP-Group Digest V94 #151 To: tcp-group-digest TCP-Group Digest Mon, 18 Jul 94 Volume 94 : Issue 151 Today's Topics: WNOS + dama mode Send Replies or notes for publication to: . Subscription requests to . Problems you can't solve otherwise to brian@ucsd.edu. Archives of past issues of the TCP-Group Digest are available (by FTP only) from UCSD.Edu in directory "mailarchives". We trust that readers are intelligent enough to realize that all text herein consists of personal comments and does not represent the official policies or positions of any party. Your mileage may vary. So there. ---------------------------------------------------------------------- Date: Mon, 18 Jul 94 08:42:29 EST From: BARRY TITMARSH Subject: WNOS + dama mode To: dl1bke , TCP-GROUP Hi, I have just used your notes (dl1bke dama howto for wnos) and added dama_slave to my wnos 4a8 router box. I tested it on a flexnet dama digi and a TNN dama digi, I have a problem. the outgoing I frames are not sent with the (DAMA) flag set and incoming I frames cause an instant crash, i suspect there may be a small bit of the dama implementation in your notes that is forgotten or i have miss read them. (being the notes are in German hi) Can you give some idears where to look for the missing con_flag ?? or dama_busy flag ?? in ax25rout.c i think ? or whatever. I looked at the src code of WNOS-5 but db3fl has not implemented the dama code in the same way.. He has not changed the iface.c .h files to show the ifconfig dama offºincºdec control and the DAMA mode on X connects or DAMA mode off infos. also he has mixed up the code in his own way and nothing is completely recognisable anymore hi. so can you please advise. Thanks.. Barry. gm8sau/dc0hk ------------------------------ End of TCP-Group Digest V94 #151 ******************************